![]() If you can’t see anything blocked up there, then you can remove the pipe from the drain pump housing and check all the way through. You should first remove the pipe from the spigot under the sink and make sure there are no blockages at that end, as that’s usually where they are. The waste pipe connects to the pump housing and then runs from the pump through the back of the machine all the way to where it’s connected to your plumbing.Ĭoins that are left in your clothes during a wash cycle are the perfect size to escape the drum and get lodged in the waste pipe. If your washing machine will not drain the water away but you can’t find any blockages in the drain pump, then it’s a good idea to inspect the waste pipe. The water waste pipe on a washing machine is usually grey and comes out from the bottom of the machine at the back. Washing machines are prone to blockages from small items that you forget to remove from your pockets and clothing such as socks and small baby clothes. Be careful when removing the filter because if your machine is full of water and you remove the cap, it will flood out all over the floor. If you take a look behind the plastic flap, you will find the drain pump filter. Most washing machines will have a plastic panel at the bottom and on the right-hand side, which is the drain pump filter flap. The drain pump is responsible for pumping the water out of the machine. If your machine is making a humming noise but will not drain the water, it’s likely that the drain pump is blocked and the impeller on the pump can’t turn. We have put together a checklist of the 4 most common reasons why your washing machine would stop draining. Most of the time it’s caused by a blockage somewhere in the machine and can be fixed quite easily. If your machine has stopped mid-cycle full of water, then it’s usually something that can be repaired with the correct knowledge. It can be frustrating when your washing machine suddenly stops draining the water from the drum.
0 Comments
Leave a Reply. |